Sprinter Phone Mount Guide: MagSafe vs. RAM Ball | Rimrock Labs
Rimrock Labs.

Sprinter Phone Mounts: MagSafe, Adjustable or RAM Ball?

Compare three Sprinter dash-cubby phone mounts by cubby lining, ball size, charger fit and included hardware. Choose the right setup before ordering.

By Rimrock Labs

Sprinter Phone Mounts: MagSafe, Adjustable or RAM Ball?

Choose a fixed MagSafe cubby mount for a simple phone position, the adjustable holder for angle adjustment, or a ball adapter if you already have a compatible arm and device cradle. Before choosing, check the cubby’s side and lining, your phone case, and whether you need a charger or only a holder.

This guide compares Rimrock Labs’ three dash-cubby designs using their listed configurations. It is not a test of every Sprinter mount on the market. The product pages are the source for current options and availability.

Which mount matches your setup?

Your setupStart withWhat to check
You want a fixed MagSafe phone location2019+ MagSafe cubby mountDriver or passenger side; mount-only versus charger option
You want adjustable phone positioningAdjustable holder or chargerPlastic or rubber-lined cubby; magnetic holder, charger holder or included charger
You already own mounting componentsDash-cubby ball adapterCubby style, single or dual balls, and exact ball diameter

These are different configurations, not interchangeable names for the same product. In particular, a mount-only order should not be assumed to include charging hardware.

Identify your dashboard cubby first

Take a clear photo of the empty cubby and compare it with the listing images. Note whether it is on the driver or passenger side and whether its interior is bare plastic or rubber lined.

The adjustable holder and separate ball adapter have options for both lining styles. The fixed MagSafe mount is listed for 2019+ Sprinters; do not extend that fitment to an older dashboard simply because both vehicles are called Sprinters. If the photos do not match, send the shop your model year and a cubby photo before ordering.

The mounts use the existing cubby rather than a drilled dashboard attachment. That makes selecting the correct insert important: do not force a mismatched insert into place.

A 17 mm ball is not a 1-inch RAM ball

The adjustable holder uses a 17 mm ball. The separate adapter offers 17 mm, 20 mm, Type A, Type B and Type C options, as well as a custom option. Match the size to your socket, not just to the brand name on an arm.

For comparison, RAM’s own B-size ball adapter specification identifies B size as a 1-inch ball. A socket intended for that size is not the same as a 17 mm phone-holder socket. If you already own an arm, check its model number or measure the ball before choosing.

Magnetic attachment and wireless charging are separate

A magnetic holder positions the phone. A charger supplies power. Your phone, case, charger and power adapter must all support the intended charging setup.

Do not assume every phone can charge wirelessly because it fits a magnetic case. Apple also distinguishes MagSafe charging from charging non-MagSafe Qi devices in its MagSafe charger guidance.

Our phone-mount listings identify charger models checked for physical fit, including Apple A2580, A3250 and A3503. Physical fit is not a promise of a particular charging speed. Check your charger’s power requirements and confirm the exact charger model before reusing one you already own.

Plan the cable route before buying

Choose a cable length that reaches your power source without crossing controls or leaving a loose loop in the driver’s area. Set up and adjust the phone while parked, and keep the vehicle’s controls, view and airbag areas clear.

If you use the windshield-side charging compartment, the Sprinter cable pass-through is a separate accessory for routing cords with the hatch closed. Compare your compartment and lid with its photos; it is not included with the phone mount.

What should you send us if fit is uncertain?

Send your model year, a photo of the empty cubby, driver or passenger preference, phone and case model, and the charger or arm you want to reuse. Those details are more useful than a trim name alone.

Browse the Sprinter accessories collection once you know which setup fits. Choose only the hardware you need; an existing compatible charger or arm may make a mount-only configuration the better purchase.